AUTONET TV

Keep Your Tires Well Rounded in Garner: Tire Rotation and Wheel Balancing at Matt Davis Auto

Taking care of our tires is part of vehicle care for Garner drivers. We know they have to be replaced when they wear out, but tires also require some preventive maintenance. This maintenance will improve and extend the life of the tires, so it's well worth the effort and expense for Garner drivers to get it done. Tire maintenance includes keeping tires properly inflated, rotating tires and balancing wheels.

The recommended tire pressure for a vehicle's tires is printed on a sticker on the inside of the driver's side doorjamb. A lot of engineering goes into calculating the correct pressure, so it's an important number for Garner vehicle owners to know. Not following this recommendation can throw off the suspension system and can lead to tire damage. Underinflated tires wear out more quickly than properly inflated tires. Vehicles also get better traction and handling on properly inflated tires. Check your tire pressure at least once a week and add air if necessary.

Don't be tempted to add a bit of extra air to your tires when you fill them. Overinflated tires will cause the center tread to wear unevenly because of improper contact with the road. It will also affect the handling performance of your vehicle.

Rotating tires allows all four tires on a vehicle to wear evenly. Front tires get more wear than rear tires because they do most of the work on turns. Tire rotation allows all of the tires to spend time on the front of the car so they all experience the extra wear.

For most vehicles, tire rotation is simply a matter of moving the front tires to the rear and vice versa. Some vehicles, however, recommend a cross-rotational pattern. Other vehicles use asymmetrical tires, which means the right tires have to stay on the right side of the vehicle and the left tires on the left. Some vehicles use differently sized wheels on the front and back of the car and should not have their tires rotated.

What kind of rotation do you need? Check your owner's manual or talk to your service advisor at Matt Davis Auto. Your owner's manual will have information about how to rotate your vehicle's tires as well as letting you know how often you should get it done. For most vehicles, that's usually every 5,000 miles or 8,000 kilometers Your friendly and knowledgeable Matt Davis Auto professionals can also offer auto advice about tire rotation. A quick tire inspection can also indicate whether or not your tires are due to be rotated.

When it comes to tire maintenance for Garner drivers, wheel balancing is usually what we know least about. Balancing a wheel is necessary to keep it in constant contact with the road. If a tire is not balanced properly, it actually hops along the roadway. You can feel this hopping as a vibration in your steering wheel if the unbalanced tire is a front tire. You'll feel the vibration through your seat if a rear tire is unbalance. Properly balancing your tires is important and will extend their life span, improve handling and improve the safety of your vehicle. When you replace your tires, the new tires need to be balanced.

Never use different sized tires on the same axle of a vehicle. In other words, your front tires need to be the same size and your rear tires need to be the same size. Mixing sizes can lead to some serious handling problems for Garner drivers.

If you have an all-wheel drive or four-wheel drive vehicle, all four tires need to be the same size. If your tires are wearing out, you can sometimes make a new tire purchase fit within your budget by only buying two tires at a time. When you do this, the new tires should be installed on the rear of the vehicle. Rear tires are more in need of the traction than your front tires to avoid spinning out on slippery surfaces. If you drive a vehicle around Garner, you need tires, so you need to know how to care for them. The safety of your vehicle can depend on the condition of your tires.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

I NEED All Wheel Drive (Pros and Cons of AWD)

So winter has arrived and you don't feel confident in how your 2-wheel drive vehicle does in the snow and ice.  You envy all those people with all-wheel-drive (AWD) and 4-wheel-drive (4WD) cars, trucks and SUVs.  You start thinking, "I need one of those.  I'll be able to go anywhere without any worries."  The truth is there might be another option for you that you might not have thought of. 

Sure, you've seen the ads that tout the advantages of AWD and 4WD, and some of the videos make it look like they can handle everything Mother Nature can throw their way.  The truth, though, is that vehicles with drive wheels at all four corners can't stop any more quickly than those with 2-wheel-drive.  Yes, AWD and 4WD vehicle have advantages when it comes to acceleration, but when it comes to stopping and handling, they generally don't. 

If you buy a new AWD or 4WD vehicle, you are going to spend thousands of dollars.  Maintenance and upkeep costs are higher due to the vehicle's increased complexity and weight, and you're likely to take a hit in fuel economy.  So, what's the option we mentioned above?  It's simple.  Winter tires. 

If you have a front-wheel-drive (FWD) vehicle with winter tires, you'll notice a tremendous difference in your winter traction and stopping than the all-season tires that are on most vehicles.  One tire company, Michelin, wanted to find out which was better in the snow: an AWD car with all-season tires or a FWD car with winter tires.  And they found while the AWD car could get going a little more easily, in most of the other comparisons, the FWD car with winter tires handled equally or better and stopped in a shorter distance.  The optimal combination would be, of course, AWD or 4WD with winter tires.  But one major consumer testing magazine found that only about 12 percent of their subscribers who drove AWD or 4WD vehicle in the snow for more than 6 days in the previous winter even used winter tires!

So a set of winter tires may give you the handling and stopping you're looking for and for a lot less cash than a new AWD vehicle.  Consult your service advisor for some recommendations.  You may be pleasantly surprised at how you can handle winter roads without having to handle a new, big, fat monthly payment for a new vehicle. 

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Wishy-Washy in Garner

Perhaps you've found yourself driving when something all of a sudden splashes on your windshield, obstructing your view. You know that sinking feeling when you try to turn on the windshield washers and no fluid comes out. Now you're blinded even more. What can you do?

The best thing is to make sure your windshield washer fluid is always topped off and ready for these situations. You probably figure you'll grab a bottle of that blue stuff you see in the store. But is that really the right choice?

One thing you know isn't the right choice is plain water. It can freeze when temperatures drop. Plus, when it's close to the freezing mark outside, spraying water on your windshield can freeze, turning it literally into frosted glass and blinding you suddenly. Water freezing in your vehicle's washer lines can also damage them.

There are different types of windshield washer fluid made for different climates. Many have alcohol to prevent them from freezing; their label will usually tell you at what temperature they'll start to freeze.

Some washer fluids will have detergents in them so they can cut through contaminants and dirt. Still other washer fluids have a chemical in them to prevent streaking.

Also keep in mind some washer fluids are made to be put in your fluid reservoir as is; others are made to be diluted.

No matter what washer fluid you pick, make sure you have plenty of it in your vehicle. Our pros at Matt Davis Auto can top off your levels with the right kind of fluid. That's also a good reminder to have your windshield washer system working properly. Your technician can check not only the washers but the wiper blades and motor to make sure all are in top condition. The worst time you can discover it is usually when you need it most.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Automotive Tips from Matt Davis Auto: A Broken or Damaged Timing Belt

The timing belt rotates the cam shafts which open and close the valves that allow air, fuel, and exhaust to flow through the engine as it powers your car when you drive around Garner.

An old timing belt can lose a “tooth” in the belt allowing it to slip. The engine could stop or misfire. Timing belt slips – or a broken timing belt – can be disastrous on some engines. In “interference” engines, open valves can get in the way of the piston when the timing belt breaks or slips. When that happens one or more valves can be bent requiring expensive engine repairs.

It is important for Garner drivers to replace their timing belts as recommended in their owner’s manual to avoid unnecessary breakdowns. Ask the team of professionals at Matt Davis Auto in Garner if it’s time for your timing belt to be replaced.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

For Brakes' Sake (Brake Rotor Service in Garner)

Think of how much abuse your brakes take. Day in and day out, they stop your vehicle when it's going fast and when it's going slow. Maybe your vehicle has been vibrating when you brake, or maybe it seems like your stopping distance is a little bit longer than it used to be.

Then it's time to get your brakes checked out. After all, you have to be able to stop if you want to be safe. Nearly all newer vehicles have disc brakes on the front, and many have that type of brake on all four wheels. That makes it likely you'll be getting disc brakes fixed at some time in your vehicle's lifetime.

Knowing how disc brakes work is as easy as riding a bicycle. If your bike had hand brakes, you'll probably remember a mechanism that squeezed a couple of pads on each side of your bicycle wheel when you applied the brakes. Disc brakes are similar; but instead of the bike wheel, there's a metal disc instead. If that disc is warped or has irregularities in it, it's going to vibrate.

It used to be that rotors were thick, and when they warped, a technician could "turn" them to scrape off a layer of metal so their sides were straight again. The latest vehicles are using thinner, lighter rotors with a slightly different construction. Now, it's likely that rotors that are resurfaced this way will not have enough metal left to work safely. In fact, some manufacturers advise only replacing rotors that are worn out.

Newer designs have reduced rotor prices, and in many cases, the labor cost of turning the rotors is higher than buying new. There are times, though, where your rotors can be resurfaced and still meet manufacturer specifications.

If you have a rotor replaced on one side of your vehicle, it might be a good idea to replace rotors on the other side, too.

Maybe you're looking for the new rotors to last longer than the ones that were on there. New technologies can offer a longer lifespan in a premium rotor. Armed with knowing the type of driving you do, you and your Matt Davis Auto service advisor can make the best decision on which direction you want to go with your new brakes.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com