AUTONET TV

Stuck! (Vehicle Door Issues)

This may have happened to you.  You drive somewhere and get out of your vehicle only to try closing the door and it just won't stay closed!  What a helpless feeling.  You can't lock it; you can't leave it like it is. Or, let's say you head down to your vehicle to head out to work in the morning and you can't open the door.  What are you going to do now?

Vehicle doors take a lot of abuse.  They are opened and closed hundreds of times and we expect them to just keep working perfectly all the time.  They do require a bit of tender loving care.  Let's take a look at two different scenarios of stuck doors.

First: the door that won't close.  It's a security issue.  It's also a safety issue.  You can't really safely drive a vehicle with a door that won't close. What if you or a passenger is tossed out?  Sure, some people try to tie a stuck-open door closed or bungee it, but that's dangerous.  It's best to get that vehicle to the service repair facility as soon as you can, and having it towed is the safest way. 

Second: the door that won't open.  There are many reasons this can happen.  Freezing weather is one, a misaligned door is another.  There could be electrical issues.  Corrosion could have broken a part inside the door.  The possibilities, unfortunately, are numerous.

If you can't get into your vehicle's driver's door, with any luck another door might open and you can climb into the driver's seat and head on to the repair facility.  A lot of people may be tempted to try to fix a stuck door themselves, but many wind up causing more damage to the door and have to have a trained technician step in to repair the mess.

One way to minimize the possibility of having a door stick open or closed is to make sure it gets regular maintenance.  Door locks, hinges and latches should be lubricated at certain intervals.  Locks should be kept clean.  While many vehicles now have electronic locks, sometimes an electrical failure in the vehicle or key fob can inadvertently lock you out.  Nearly every vehicle has a mechanical key in case that happens; if you don't know how that works, have your service advisor show you how. 

Also, you technician can make sure your doors are properly aligned and aren't sagging. All of these things can help you keep your doors opening and closing the way they were designed to. Your next trip may "hinge" on your doors being in top condition.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Steering Clear in Garner

Those who know vehicles believe the steering system may be the most vital component of them all. Perhaps you've found over the years your steering has gotten loose. Or maybe suddenly, your steering wheel has gotten very hard to turn. Let's steer you in the direction of understanding why this may be happening.

First, loose steering. This can likely be the result of wear and tear on the components that connect the steering mechanism with the wheels. Those parts can be ball joints, Pitman arms or tie rods. These parts take a lot of abuse on the road, thanks to railroad tracks, potholes, uneven surfaces: you name it. It's important that they be checked regularly and maintained at Matt Davis Auto.

Second, the hard-to-turn wheel. Virtually all vehicles on the road have power steering. There are a couple of different types, though, so let's deal with each. By the way, when they fail, your vehicle's steering can suddenly go from easy peasy to really hard to control.

Some vehicles have hydraulic power steering. It uses a hydraulic fluid that can either leak out or become contaminated. When that happens, you can lose that power assist. There's also a belt involved, and if it becomes worn, stretched or cracked (or even breaks), you'll find yourself struggling with the wheel. If you hear a loud whine coming from the area in the engine compartment when you are steering, that could mean your power steering pump is failing. The best way to avoid these problems is regular maintenance.

Recently, manufacturers have been using electric power steering systems that have some advantages over hydraulic systems. They have electric motors that—like everything mechanical—can fail. Sometimes a fuse to the power steering motor will blow, but simply replacing the fuse often doesn't get to the root cause of the problem. A Matt Davis Auto technician can evaluate the system and recommend a solution.

Steering issues are all about safety and should be addressed as soon as possible. When you tell your service advisor, try to be specific about the signs and symptoms. It's one way to steer clear of trouble on the road.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Have a Ball! Know your Ball Joints (Ball Joints)

We all have joints in our own skeletal system, but did you know your vehicle has some joints of its own? One of the most important is called a ball joint.

One of the interesting things is that it's somewhat similar to the ball and socket joints we have in our hips and shoulders.  A ball joint allows two parts it joins together to move in more than one direction at the same time.

Think about your wheels.  They have to move up and down when there are bumps in the road but in sideways directions when you are making a turn. As you can see, the ball joints are important for your steering and handling to work correctly.

Since ball joints do so much, they can wear out and become loose.  When the ball wears down or the socket gets worn, there can be too much play in them.  It can get so bad that the ball can come out of the socket and your wheel can fall off, a dangerous situation.  Ball joints can also seize up.  Some of them are sealed and never require maintenance; others require periodic lubrication.

Here are some signs that your ball joints are going bad:

• Your vehicle pulls to one side
• You can hear a clunking noise coming from a wheel area
• Your tires are wearing unevenly, especially on the inside

The earlier a failing ball joint is discovered, the better. The best way is to have regular inspections by a technician.  Your service facility will periodically check ball joints at intervals recommended by the manufacturer. The cost to replace them can vary widely depending on whether you have a vehicle with a 2-ball or 4-ball configuration.  Also, sometimes just the joints can be replaced, but other times they are part of a larger control arm assembly that has to have all the parts replaced at the same time. 

Your vehicle's proper steering, handling and tire wear all contribute to a better, safer driving experience.  Make sure your ball joints are up to the job.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Matt Davis Auto Automotive Tips: Diagnostic Service

Imagine waking up one morning with a stomach ache. You pick up the phone, call the doctor’s office and say, “I’ve got a really bad tummy ache. How much will it cost to make me feel better?” Of course you wouldn’t do that. You know that there could be a lot of reasons for your symptoms and that the doctor will have to examine you, ask some questions and probably run some tests before she can tell you what’s wrong and give you treatment options.

This same scenario plays out every day at NC auto repair facilities. When the cause of the concern isn’t obvious, the car will need to undergo a diagnostic examination. The typical car has about 30,000 parts, including several networked computers and miles of wiring. Finding exactly what is wrong can be very complicated and take some time. The most experienced technicians at Matt Davis Auto in Garner are the ones who tackle the difficult diagnostic jobs. Once they have determined the cause of the trouble, they can work out the plan for how to fix it and tell you how much it will cost.

When you think about it this way, it makes perfect sense that, 1) the Matt Davis Auto service advisor cannot provide an estimate before the diagnosis is done, and 2) there is a charge for auto diagnostic services in Garner. You expect to pay for an office visit to the doctor and for any necessary tests before you can be presented with your treatment options and costs; same goes for your vehicle.

We know it can be frustrating for Garner drivers when something is wrong with your car and you aren’t sure what is going to be involved in getting it fixed. We are passionate about helping you through the process, communicating with you at each step along the way. We have highly trained diagnostic technicians and technologically-advanced diagnostic equipment to uncover the cause of your trouble. We use quality replacement parts to help make sure you stay on the road after the repair is done. That’s our prescription for automotive peace of mind.

Give us a call.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com

Automotive Tips from Matt Davis Auto: Tire Replacement Overview

Tires are an expensive purchase, so knowing when tires should be replaced is important for Garner drivers. Tires will just wear out with normal use. The depth of the tread on your tire determines how well it will stop, start and steer – especially in wet conditions. 4/32th of an inch (3.2 mm) of tire tread is considered a safe amount of tread.

Uneven tread wear can be a symptom of other problems, and simply replacing your tires will not prevent the same uneven wear from happening to the new tires. At Matt Davis Auto in Garner, we can inspect your tires for excessive or uneven wear. Unusual wear may lead to further inspection of steering, suspension or alignment problems. We can help with necessary repairs and with getting you the right tires for your needs.

Give us a call.

Matt Davis Auto
875 US Highway 70 W
Garner, NC 27529
(919) 600-5125
http://www.mattdavisauto.com